How can the “inaccessible boot device” be fixed in VMWare Windows Server 2016? Read the article to learn more. At Bobcares, with our Windows Hosting Support, we can handle your issues.

Fixing the “Inaccessible Boot Device” in VMWare Windows Server 2016

A typical error or stop code that appears as a guide when we encounter a Blue Screen issue on Windows Server and Windows Server 2008/2012/2019 is “Inaccessible Boot Device.” This issue typically indicates that during startup, the Windows Server operating system lost access to the system partition. As a safeguard against possible data loss or corruption, the system will shut down and display a Blue Screen or Stop Error when it happens.

Some of the possible causes for the error are as follows:

1. Files in the boot partition that are corrupt.

2. Damage to system files.

3. A bad sector on the primary hard disk.

4. The BIOS’s storage controller mode or settings are modified.

5. A malfunctioning storage controller, motherboard, or other piece of hardware.

6. Conflict between recently installed hardware and other devices.

7. Recently installed software that is miswritten or incompatible with other apps.

8. Inaccurate Master Boot Record or no Boot Configuration Information.

Troubleshooting Tips

We can use any of the following steps in order to fix the error, “Inaccessible Boot Device.”

1. Revert the most recent server upgrade.

2. Launch the Last Known Good Configuration on the server.

3. Use Command Prompt to check the boot partition for problems.

4. Verify the integrity of the system files.

5. Fix broken MBRs and BCDs.

[Need to know more? Get in touch with us if you have any further inquiries.]

Conclusion

The article provides a brief explanation of the “inaccessible boot device” issue on VMWare, Windows Server 2016.